Dev C++ Two Console Opening When Ran
30.07.2020by admin
When I compile and run my code, the console window no longer shows up. (I have 'system('pause');' included, this is not the issue). I was trying to debug a program in Dev C and must have changed some settings. Nov 26, 2007 I also ran Registry Mechanic afterwards for any additional registry cleaning. I then assumed that I did everything there is to do in order to bring my system back to the state it was in before I installed Dev-C and allegro. I then restarted the computer. I reinstalled the full Dev-C (I did not do anything for allegro yet). Jul 17, 2015 /quote For a while I did all of these and the console window kept showing. Eventually I compiled and ran the program and it didn't show. I think I might have had my C program not contained to any project, though a project looked like was the project with my program in it on the panel on the left. Is there any way how to run multiple instances of the same program in c? Let's say for example you have a simple card game and you want to run it 3 times. Something like in GUI where you click on New Game button and it opens one instance of a game where you can play and then you click on New Game button again and it opens another instance. Mar 11, 2020 How to Write a Multiple Choice Program in C. Have you ever wanted to create a simple program in C, or do you want to create a quiz program so that you can use it in a classroom. Follow this guide and you will be able to create a. Dec 12, 2018 graphics programming in dev c with examples graphics in dev c rar graphics in dev c free download bgi graphics c graphics.h download for code blocks dev c include library how to add.
Okay this is a first for me. My code compiles absolutely fine with no errors what so ever. But when I click 'Run' or 'Compile & Run', the little command window pops up but the output never appears? The command window tries to load the code for about 5 seconds and then it gives up, when usually it takes about 1 second to see my output.
After it tries to load, the command window stays scrolled down all the way at the bottom. Usually the code appears at the very beginning of the command window, so when I tried to scroll up, the side bar immediately pulls itself down.
I have made 9 different programs over the past 5 months and every single one of them runs fine except this one.
What I am doing in my code, is creating a class. This class is using methods to add, subtract, and multiply matrices. Assuming my code is fine, why is Dev C++ doing this?
I'd post my code, but it compiles without a hitch and it's 300+ lines of code. I'm sure nobody wants to read that much into this.
Does anyone know why this happening?
P.S. I don't even get the 'Press any key to continue..' that usually appears after your output in the command prompt window, even after waiting five minutes.
After it tries to load, the command window stays scrolled down all the way at the bottom. Usually the code appears at the very beginning of the command window, so when I tried to scroll up, the side bar immediately pulls itself down.
I have made 9 different programs over the past 5 months and every single one of them runs fine except this one.
What I am doing in my code, is creating a class. This class is using methods to add, subtract, and multiply matrices. Assuming my code is fine, why is Dev C++ doing this?
I'd post my code, but it compiles without a hitch and it's 300+ lines of code. I'm sure nobody wants to read that much into this.
Does anyone know why this happening?
P.S. I don't even get the 'Press any key to continue..' that usually appears after your output in the command prompt window, even after waiting five minutes.
By Alex on December 16th, 2007 last modified by nascardriver on December 24th, 2019
In this section, we’ll address some of the common issues that new programmers seem to run across with fairly high probability. This is not meant to be a comprehensive list of compilation or execution problems, but rather a pragmatic list of solutions to very basic issues. If you have any suggestions for other issues that might be added to this list, post them in the comments section below.
General run-time issues
Q: When executing a program, the console window blinks and then closes immediately.
First, add or ensure the following lines are near the top of your program (Visual Studio users, make sure these lines appear after #include “pch.h” or #include “stdafx.h”, if those exist):
2 | #include <limits> |
Second, add the following code at the end of your main() function (right before the return statement):
2 | std::cin.ignore(std::numeric_limits<std::streamsize>::max(),'n');// ignore any characters in the input buffer until we find an enter character |
This will cause your program to wait for the user to press a key before continuing, which will give you time to examine your program’s output before your operating system closes the console window.
How to use auto-tune live. Other solutions, such as the commonly suggested system(“pause”) solution may only work on certain operating systems and should be avoided.
Dev C Two Console Opening When Ran Away
Older versions of Visual Studio may not pause when the program is run in Start With Debugging (F5) mode. Try running in Start Without Debugging (Ctrl-F5) mode.
Q: I ran my program and get a window but no output.
Your virus scanner or anti-malware may be blocking execution. Try disabling it temporarily and see if that’s the issue.
Q: My program compiles but it isn't working correctly. What do I do?
Debug it! There are tips on how to diagnose and debug your programs later in chapter 3.
General compile-time issues
Q: When I compile my program, I get an error about unresolved external symbol _main or _WinMain@16
This means your compiler can’t find your main() function. All programs must include a main() function.
There are a few things to check:
a) Does your code include a function named main?
b) Is main spelled correctly?
c) When you compile your program, do you see the file that contains function main() get compiled? If not, either move the main() function to one that is, or add the file to your project (see lesson 2.8 -- Programs with multiple code files for more information about how to do this).
d) Did you create a console project? Try creating a new console project.
Q: I'm trying to use C++11/14/17/XX functionality and it doesn't work
If your compiler is old, it may not support these more recent additions to the language. In that case, upgrade your compiler.
For modern IDEs/compilers, your compiler may be defaulting to an older language standard. We cover how to change your language standard in lesson 0.12 -- Configuring your compiler: Choosing a language standard.
Q: When trying to use cin, cout, or endl, the compiler says cin, cout, or endl is an 'undeclared identifier'
First, make sure you have included the following line near the top of your file:
Second, make sure each use of cin, cout, and endl are prefixed by “std::”. For example:
If this doesn’t fix your issue, then it may be that your compiler is out of date, or the install is corrupted. Try reinstalling and/or upgrading to the latest version of your compiler.
Q: When trying to use endl to end a printed line, the compiler says end1 is an 'undeclared identifier'
Make sure you do not mistake the letter l (lower case L) in endl for the number 1. endl is all letters. Make sure your editor is using a font that makes clear the differences between the letter lower case L, upper case i, and the number 1. Also the letter capital o and the number zero can easily be confused in many non-programming fonts.
Visual Studio issues
Q: When compiling with Microsoft Visual C++, you get a C1010 fatal error, with an error message like 'c:vcprojectstest.cpp(263) :fatal error C1010: unexpected end of file while looking for precompiled header directive'
This error occurs when the Microsoft Visual C++ compiler is set to use precompiled headers but one (or more) of your C++ code files does not #include “stdafx.h” or #include “pch.h” as the first line of the code file.
Our suggested fix is to turn off precompiled headers, which we show how to do in lesson 0.7 -- Compiling your first program.
If you would like to keep precompiled headers turned on, to fix this problem, simply locate the file(s) producing the error (in the above error, test.cpp is the culprit), and add the following line at the very top of the file(s):
Older versions of Visual Studio use “stdafx.h” instead of “pch.h”, so if pch.h doesn’t resolve the issue, try stdafx.h.
Note that for programs with multiple files, every C++ code file needs to start with this line.
Alternatively, you can turn off precompiled headers.
Q: Visual Studio gives the following error: '1MSVCRTD.lib(exe_winmain.obj) : error LNK2019: unresolved external symbol _WinMain@16 referenced in function 'int __cdecl invoke_main(void)' (?invoke_main@@YAHXZ)'
You’ve likely created a Windows graphical application rather than a console application. Recreate your project, and make sure to create it as a Windows (or Win32) Console project.
Q: When I compile my program, I get a warnings about 'Cannot find or open the PDB file'
This is a warning, not an error, so it shouldn’t impact your program. However, it is annoying. To fix it, go into the Debug menu -> Options and Settings -> Symbols, and check “Microsoft Symbol Server”.
Something else
Q: I have some other problem that I can't figure out. How can I get an answer quickly?
As you progress through the material, you’ll undoubtedly have questions or run into unexpected problems. What to do next depends on your problem. But in general, there are a few things you can try.
First, ask Google. Find a good way to phrase your question and do a Google search. If you have received an error message, paste the exact message into google using quotes.
Odds are someone has already asked the same question and there is an answer waiting for you.
If that fails, ask on a Q&A board. There are websites designed for programming questions and answers, like Stack Overflow. Try posting your question there. Remember to be thorough about what your problem is, and include all relevant information like what OS you’re on and what IDE you’re using.
Dev C++ Two Console Opening When Ranger
| 0.9 -- Configuring your compiler: Build configurations |
| Index |
| 0.7 -- Compiling your first program |
Comments are closed.